Canon imageclass 2300n 사용자 가이드
Document Stamp Feature
3-19
Basic Sending
3
Turning ON/OFF the Stamp Feature
You can stamp every page you send or scan for sending using the stamp feature. If
you place the document horizontally in the feeder, the document is stamped at the
position shown in the illustration below.
you place the document horizontally in the feeder, the document is stamped at the
position shown in the illustration below.
IMPORTANT
The stamp feature does not stamp documents you scan for sending using the platen
glass or copying.
glass or copying.
NOTE
You can also turn the stamp feature ON/OFF using the Additional Functions menu.
(See "Changing the Fax Default Settings," on p. 10-17.)
You can select whether the machine stamps documents you scan for direct, and memory
sending, or only for direct sending. (See "Setting the Stamp Feature," on p. 3-17.)
Be careful, because no information is displayed about the stamp feature even if it is
turned ON.
(See "Changing the Fax Default Settings," on p. 10-17.)
You can select whether the machine stamps documents you scan for direct, and memory
sending, or only for direct sending. (See "Setting the Stamp Feature," on p. 3-17.)
Be careful, because no information is displayed about the stamp feature even if it is
turned ON.
1
Press [FAX].
lights, and the Fax Basic Features screen appears.
2
Place your documents in the feeder.
3
Open all three one-touch speed dialing panels
➞ press
[Stamp].
The TX STAMP menu appears.
Stamp
FAX
FAX
Stamp