Canon imageclass 2300n 사용자 가이드
Redialing When the Line Is Busy
3-33
Basic Sending
3
Checking Automatic Redialing
1
Press [Monitor].
If the copy job monitor screen is displayed, press [Monitor] again.
The fax job monitor screen is displayed.
2
Press [F1] (TX/RX RESULT).
● If you are sending a document using Direct Sending:
❑
The following display appears. When the machine is waiting to redial, be sure
to leave the document in the feeder.
to leave the document in the feeder.
NOTE
If you do not want to send the document using automatic redialing, press
(
▼) or
(
▲) to select the transmission you want to cancel ➞ press
(DELETE DOCMT).
If the message <OK TO DELETE?> appears on the display, press
If the message <OK TO DELETE?> appears on the display, press
(YES) to
cancel automatic redialing. The document will be deleted from memory.
To cancel redialing, press
To cancel redialing, press
(Stop). Redialing is canceled immediately.
If the TX Error Resend function is ON, the machine also redials when an error
occurs during sending.
For details about setting up automatic redialing, see "Automatic Redialing," on p.
3-29.
If the machine does not manage to send the document, the machine waits for
another two minutes and dials again. If the transmission fails again, sending is
canceled, and an Error TX Report is printed. (See "TX Reports," on p. 11-2.)
occurs during sending.
For details about setting up automatic redialing, see "Automatic Redialing," on p.
3-29.
If the machine does not manage to send the document, the machine waits for
another two minutes and dials again. If the transmission fails again, sending is
canceled, and an Error TX Report is printed. (See "TX Reports," on p. 11-2.)
F2
F3
F4
F3
Monitor
F1