Canon imageclass 2300n 사용자 가이드

 

Supply an suitable table, cabinet, or desk. See the Appendix of the Reference 
Guide for the unit's dimensions and weight.

1. Only a single telephone line (touch-tone or rotary) is to be used.

2. Order an RJ11-C telephone wall jack (USOC), which should be installed by the 

telephone company. If the RJ11-C wall jack is not present, telephone/facsimile 
operation is not possible.

3. Order a normal business line from your telephone company's business 

representative. The line should be a regular voice grade line or the equivalent. 
Use one line per unit.

DDD (Direct Distance Dial) line

-or-

IDDD (International Direct Distance Dial) line if you communicate overseas

NOTE

 

Canon recommends an individual line following industry standards, i.e., 2500 (Touch 
Tone) or 500 (Rotary/Pulse Dial) telephones. A dedicated extension off a PBX unit 
without "Call Waiting" can be used with your facsimile unit. Key telephone systems are 
not recommended because they send non-standard signals to individual telephones for 
ringing, or send special codes that may cause a facsimile error.

The machine should be connected to a standard 120 volt AC, three-wire grounded 
outlet only. Do not connect this unit to an outlet or power line shared with other 
appliances that cause "electrical noise." Air conditioners, electric typewriters, 
copiers, and machines of this sort generate electrical noise that often interferes 
with communications equipment and the sending and receiving of documents.