Canon imageclass 2300n 사용자 가이드

Sequential Broadcasting to More Than One Location

Additional Sending F

eatures

NOTE

 

Regardless of the order you used when dialing, the machine sends the documents 
to the destinations you specified in the following order: one-touch speed dialing 
numbers, coded speed dialing numbers, regular dialing numbers, then redialing.
If you have placed your document on the platen glass, enter the fax numbers, scan 
all the papers of the document into memory 

➞ press 

 (OK).

To cancel Sequential Broadcasting, press 

 (Stop). After the message <CANCEL 

DURING TX/RX?> appears, press 

 (YES) to cancel all destinations.

If a number is busy or does not reply, the machine skips it and to send your 
documents to the other destinations, and then redials the number that was busy or 
did not reply.
The document is automatically deleted from memory when Sequential 
Broadcasting is complete.
You can also use Delayed Sending when using Sequential Broadcasting. (See 
"Sending Documents at a Preset Time," on p. 4-15.)

 

Print a Multi TX Report to make sure all your transactions completed successfully 
when using Sequential Broadcasting. In order to print the Multi TX Report, you 
must assign the PRINT REPORT function to a program one-touch key (See 
"Program One-Touch Keys," on p. 10-3.)

NOTE

 

You need to assign the PRINT REPORT function every time you wish to print the Multi TX 
Report because the machine does not retain the setting after the transactions are 
completed.

 lights, and the Fax Basic Features screen appears.

NOTE

 

You can adjust the resolution, density, and image quality. (See "Adjusting the 
Resolution, Density, and Image Quality," on p. 3-12.)
You can also specify a sender's name with [TTI Selector]. (See "Sending a 
Document with a Sender Name," on p. 3-15.)