Canon imageclass 2300n 사용자 가이드

Receive Settings

Receiving Documents

▼) or [F4] (▲) to highlight <01 OFF> or <02 ON> ➞ 

The RX SETTINGS menu returns.

 

Follow the procedure below to set the machine to print two pages of received 
documents on one sheet of paper.

To use this feature, the following conditions should be met:

The paper loaded into the selected paper drawer must be large enough for two 
consecutive pages to be printed on it.

If the machine runs out of LTR paper and has 11" x 17" paper remaining, the 
machine prints two LTR pages side by side on one 11" x 17" paper.

Conversely, if the machine runs out of 11" x 17" paper and has LTR paper 
remaining, the machine reduces the image size automatically, and prints two LTR 
pages that equal one 11" x 17" piece of paper one by one on LTR paper.

A separation line is printed in the center of each page using the 2 on 1 feature. If 
the machine is set to print the RX page footer, the separation line is printed in the 
location that corresponds to the center of page after excluding the RX page footer 
printing area.

NOTE

 

The default setting is '01 OFF'.

➞ press [F3] (▼) or [F4] (▲) to 

➞ press [OK].

The FAX SETTINGS menu appears.