Canon imageclass 2300n 사용자 가이드

Sending a Document to a Relay Unit for Relay Broadcasting

Rela

y

 Broadcasting

 

You can register a telephone number for relay sending under a one-touch speed 
dialing key or a coded speed dialing code.

Check these points before you send a document to another party for relay 
broadcasting:

Contact the other party and ask for the ITU-T subaddress and password they are 
using for receiving documents they are to relay.

The other party's fax machine does not have to be a Canon fax machine, but 
make sure the other party's fax machine supports the use of ITU-T subaddresses 
and passwords.

Perform the procedure to register a telephone number for one-touch or coded 
speed dialing. (See "One-Touch Speed Dialing," on p. 2-3, and "Coded Speed 
Dialing," on p. 2-12.)

If the speed dialing keys are already set up, perform the procedure to change the 
one-touch or coded speed dialing settings. (See "One-Touch Speed Dialing," on p. 
2-3, and "Coded Speed Dialing," on p. 2-12.)

When you set up the speed dialing settings, turn 'ON' the OPTIONAL SETTINGS 
feature, and select <03 TX TYPE>. Select <03 ORIG RELAY TX>, and set the 
ITU-T subaddress and password. (See "One-Touch Speed Dialing," on p. 2-3, and 
"Coded Speed Dialing," on p. 2-12.) 

Confirm that the other party is set up properly to relay documents received from 
your machine. Your machine cannot confirm whether the other party's machine 
has been set up properly for relaying a document sent from your machine.

 

Follow the procedure below to send a document for a relay broadcast with the 
Advanced Communication key.

NOTE

 

You can set only one destination.

 lights, and the Fax Basic Features screen appears.