Canon imageclass 2300n 사용자 가이드

Polling Sending

Using P

o

lling

This section shows you how to set up your machine to store and hold a document 
until it is polled by another fax machine to send it.

 

Before you set up your polling box, contact the parties who are going to poll your 
machine to receive documents and confirm the following points:

The other parties must know your ITU-T subaddress number.
If you are also using an ITU-T password for the polling box, they must also know 
this password. This password setting is optional.
Your TX PASSWORD must match the ITU-T password attached when the other 
party calls you. Confirm that the TX PASSWORD on your fax machine matches 
the ITU-T password attached when the other party calls you.
If the other party's fax does not support ITU-T subaddress/password transactions, 
you may be able to use polling box 00.

You can set the following for a polling box:

An asterisk (*) indicates the default setting.

01 FILE NAME

Sets up the name of the poling box.

Up to 24 letters 
and numbers

02 PASSWORD

Sets up the password that protects the settings of 
the polling box. If you open this polling box to view 
or make changes, you have to enter this password. 
You also have to enter this password to print a 
document received in the polling box. This setting 
is optional.

Up to seven 
digits

03 SUBADDRESS

Sets up the ITU-T subaddress. The sending party 
must enter the correct ITU-T subaddress to poll 
your machine. This setting is required except when 
using the polling box 00.

Up to 20 letters 
and numbers

04 TX PASSWORD Sets up the ITU-T password for your polling box. 

This setting is optional. However, if you set an 
ITU-T password for your polling box, the calling 
party must enter the correct password to poll your 
machine.

Up to 20 letters 
and numbers

05 ERASE AFTER 

TX

Tells the machine how to handle the document 
after it is polled and sent.

OFF, ON*