Canon imageclass 2300n 사용자 가이드

Placing Originals

Basic Sending

 

Place a stack of originals in the feeder 

➞ press [Start]. The machine automatically 

scans them.

You can place the following originals into the original supply tray:

IMPORTANT

 

Do not place the following types of originals in the feeder:
- Originals with tears or large binding holes
- Severely curled originals or originals with sharp folds
- Clipped or stapled originals 
- Carbon backed paper or other originals which might not feed smoothly 
- Transparencies and other highly transparent originals 
Avoid scanning the same original using the feeder more than approximately 30 times. 
Scanning the same original repeatedly may result in the original becoming folded or torn, 
which in turn could cause a paper jam.
If the feeder rollers are dirty from scanning an original written in pencil, perform the 
feeder cleaning procedure. (See Chapter 6, "Routine Maintenance," in the Reference 
Guide.)

Place your originals as far into the feeder as they will go.

Weight

10 to 32 lb bond (37 to 128 g/m

2

)

Place very thin originals (10 to 14 lb bond [37 to 51 g/m

2

]), or very thick 

originals (28 to 32 lb bond [105 to 128 g/m

2

]) into the feeder one at a time.

Size

11'' x 17''  , LGL  , LTR  , or LTR  .

Tray 
Capacity

50 sheets (LTR or smaller)
25 sheets (LGL or larger)