Canon i470d, i475d 서비스 매뉴얼
Product Service Details
Model: i475D (8997A003)
Date: 7/2/04 Page: 2 of 2
Canon
Consumer Imaging Group, Service Div.
Error Codes
Error Codes
Error Codes
Error Codes
Error Codes
Errors will be displayed on the host computer monitor. The host computer should be set to ECP or Nibble mode. Use the BJ status monitor on Windows95/
98.
98.
Error State
Indicator
Blinks
Panel Display
(Errors that can be corrected by a user)
Paper out
Paper out
Blinks in Orange
2 times
301
Paper jam
Blinks in Orange
3 times
302
Print head not installed
Blinks in Orange
6 times
402
Print head error
Blinks in Orange
7 times
403
Waste ink warning
Blinks in Orange
8 times
202
Digital camera
Blinks in Orange
11 times
611 / 612
(Errors that cannot be corrected by a user)
Carriage
Carriage
Long Green Light, then Blinks (Orange-Green)
2 times
802
Purge
Long Green Light, then Blinks (Orange-Green)
4 times
804
Internal temperature sensor
Long Green Light, then Blinks (Orange-Green)
6 times
806
Waste ink full
Long Green Light, then Blinks (Orange-Green)
7 times
807
Print head temperature
Long Green Light, then Blinks (Orange-Green)
8 times
808
EEPROM
Long Green Light, then Blinks (Orange-Green)
9 times
809
RAM
Blinks in Orange
-
-
Error Code List
Self Test
Self Test
Self Test
Self Test
Self Test
MAINTENANCE BUTTON: These operations can be performed independent of the computer. To perform one, hold down the maintenance button.
Operations
Press Right Arrow
Nozzle check
0 times. Press the print button to print the nozzle check pattern. Press the maintenance button to exit.
Cleaning
1 time. Press OK.
Deep cleaning
2 times. Press OK.
Head alignment
3 times. Press OK.
RESUME BUTTON: These operations can be performed independent of the computer. To perform one, hold down the resume button.
Operations
Number of Flashes
Remarks
Cleaning
1 time
...
Nozzle check pattern printing
2 times
Printer prints one sheet
Roller cleaning
3 times
Load A4 or no paper at all
Service Mode
Service Mode
Service Mode
Service Mode
Service Mode
This printer has a service mode for service-related settings and for performing test prints. The operator panel buttons are used to enter the desired service
mode.
mode.
Service Mode Operations
1) With the printer powered off, hold down the resume button and press the power button.
2) While holding down the power button, release the resume button and press the resume button twice in succession. Now release the power
2) While holding down the power button, release the resume button and press the resume button twice in succession. Now release the power
button. The indicator will blink in green and remain lit in green.
3) Select one of the following service mode functions by pressing the resume button the specified number of times.
Press Resume
Indicator
Functions
Zero times
Green
Power off the printer
1 time
Orange
Service test print
2 times
Green
EEPROM information print
3 times
Orange
EEPROM reset (all data cleared except USB serial number)
4 times
Green
Waste ink counter setting
6 times +
Green
Print head deep cleaning
4) Execute the function you have selected (except for model setting) by pressing the power button. The printer will switch itself off after performing
the function.
5B00
Waste ink full
5C00 Purging operation
6800
6800
EEPROM/RAM
(Errors that can be displayed on printer LCD when flash card is installed or when camera is connected to printer)
102
102
Incorrect position of paper thickness lever
202
Waste ink full
301
Paper out
302
Paper jam
402
No head installation
403
Faulty print head
611/612
Time out during communication
with digital camera
with digital camera
802/804/806/
Printer error; may require service
807/808/809
1405
Head EEPROM
1700
Waste ink near-full
2001
Digital camera
5100
Carriage
5200
Head temperature
5400
Printer temperature
1000
Out of paper
1300
Paper jam
1401
Head ID