Canon imageclass 2300n 사용자 가이드

Image Combination

Special Cop

ying F

eatures

This mode enables you to automatically reduce two or four originals to fit onto one 
side of a selected paper size.

IMPORTANT

 

If the machine is operating in the Image Combination mode, you cannot use the 
Two-Page Separation, Original Frame Erase, Book Frame Erase, or Different Size 
Originals modes.
You can set the Image Combination mode only for the original sizes shown on the LCD 
display.
Originals copied in the Image Combination mode must all be the same size.
The Image Combination mode cannot be used with free size paper.
You must have enough memory available in order to use the Image Combination mode 
with paper larger than LTR.

NOTE

 

The reduction ratio is automatically set so that the originals fit onto the selected paper 
size.
If the reduction ratio is set to less than 50% in the Image Combination mode, part of the 
copied image may be trimmed slightly.
If you set the Image Combination mode, the machine is automatically set to the Auto 
Zoom mode. However, you can also use the Preset Zoom or Zoom by Percentage mode.

■ 2 on 1

This setting reduces two originals to fit onto one copy sheet, and allows you to select the 
layout order of each original. The following two layout types are available:

IMPORTANT

 

The layout order cannot be specified when you place an original horizontally.

2

1

1

2

1

2

The originals are printed in 
the following order: right 
half (1) 

→ left half (2)

The originals are printed 
in the following order: left 
half (1) 

→ right half (2)