Canon imageclass mf6560cx 정보 가이드
11-4
Maintenance
10
Close the left cover.
CAUTION
– Be careful not to get your fingers caught.
– If you cannot close the left cover, do not
– If you cannot close the left cover, do not
force it to close. Open the cover and
make sure the toner cartridge is properly
set in the machine.
make sure the toner cartridge is properly
set in the machine.
11
Reconnect the power cord and
turn on the main power switch.
turn on the main power switch.
Fuser Roller
If black streaks appear with printing, the
fuser roller in the main unit may be dirty.
Should this occur, clean the fusing roller
in the following procedure. The roller
should also be cleaned each time the
toner cartridge is replaced. Load a sheet
of blank LTR paper into the multi-purpose
tray and start cleaning.
fuser roller in the main unit may be dirty.
Should this occur, clean the fusing roller
in the following procedure. The roller
should also be cleaned each time the
toner cartridge is replaced. Load a sheet
of blank LTR paper into the multi-purpose
tray and start cleaning.
NOTE
Cleaning the roller takes approximately 100
seconds.
seconds.
1
Press [Additional Functions].
2
Press [
] or [
] to select
<ADJUST./CLEANING>, then
press [OK].
press [OK].
3
Open the multi-purpose tray.