Canon imageclass mf6560cx 정보 가이드

xxvi

What Ca

n I Do with T

h

is Machine

?

Supply a suitable table, cabinet, or desk. See p. 14-1 for the machine’s weight and 
dimensions.

1. Provide only a single-line to touch-tone or rotary telephone set terminated with a 

standard 4-pin modular phone plug. (Touch-tone is recommended if available in your 
area.)

2. Order an CA11A modular jack (USOC code), which should be installed by the 

telephone company. If the CA11A jack is not present, installation cannot occur.

3. Order a normal business line from your telephone company’s business representative. 

The line should be a regular voice grade line or equivalent. Use one line per machine.

DDD (DIRECT DISTANCE DIAL) LINE

-or-

IDDD (INTERNATIONAL DIRECT DISTANCE DIAL) LINE IF YOU COMMUNICATE 
OVERSEAS

Canon recommends an individual line following industry standards, e.g., the 2500 (touch tone) or 
500 (rotary/pulse dial) telephones. A dedicated extension off a PBX machine without “Camp On” 
signals is also permissible with the machine. Key telephone systems are not recommended because 
they send non-standard signals to individual telephones for ringing and special codes, which may 
cause a fax error.

The power outlet should be a three-prong grounded receptacle (Single or Duplex). It 
should be independent from copiers, heaters, air conditioners or any electric equipment 
that is thermostatically controlled. The rated value is 120 volts and 15 amperes. The 
CA11A modular jack should be relatively close to the power outlet to facilitate installation.