Canon multipass f80 사용자 설명서
4-2
Photo printing from a memory card
Chapter 4
Inserting/removing a memory card
Inserting a memory card
To use a memory card, you will need to insert it into a PC card adapter before inserting it in
the card slot. Do not attempt to insert it into the card slot without a PC card adapter.
the card slot. Do not attempt to insert it into the card slot without a PC card adapter.
1
Make sure the machine is on.
• If not, press [ON/OFF(1 sec.)].
2
Insert the memory card into the PC card
adapter.
adapter.
3
Insert the PC card adapter all the way
into the card slot on the right side of
the machine.
into the card slot on the right side of
the machine.
• The indicator light
A turns on.
NOTE
• If the memory card cannot be read, check that:
– the PC card adapter containing the memory card is inserted all the way into the card slot.
– the PC card adapter containing the memory card was not removed while being read.
– you are using a compatible memory card.
– your memory card contains photographs.
– the PC card adapter containing the memory card was not removed while being read.
– you are using a compatible memory card.
– your memory card contains photographs.
Removing a memory card
CAUTION
• Do not remove the memory card or turn off the machine when the indicator light is blinking as
this may damage the data in the memory card.
1
Check that the indicator light is not
blinking q, then press [ON/OFF(1 sec.)]
to turn the machine off w.
blinking q, then press [ON/OFF(1 sec.)]
to turn the machine off w.
• If you have been writing to a memory card
in Windows 2000, wait a few seconds before
turning off the machine.
turning off the machine.
w
q
A