Canon multipass mp700 빠른 참조 카드
10-18
Troubleshooting
Chapter 10
If the nozzle check pattern does not print properly
Refer to Maintaining the printhead, p. 9-3.
Interpreting the messages
When the Alarm light blinks
Check the message in the LCD. If there is a message, follow the instructions and correct the
error. Then to resume operation, press [Resume]. The Alarm light will turn off.
If the error remains, turn off the machine and disconnect the power cord. Wait 15 seconds, then
reconnect the power cord and turn on the power.
Check the message in the LCD. If there is a message, follow the instructions and correct the
error. Then to resume operation, press [Resume]. The Alarm light will turn off.
If the error remains, turn off the machine and disconnect the power cord. Wait 15 seconds, then
reconnect the power cord and turn on the power.
If you cannot clear a paper jam
Turn off the machine and disconnect the power cord. Wait five seconds, reconnect the power
cord and turn on the power. If the problem has been resolved, the Alarm light will turn off.
Turn off the machine and disconnect the power cord. Wait five seconds, reconnect the power
cord and turn on the power. If the problem has been resolved, the Alarm light will turn off.
If the Alarm light still lights even after you have turned the power on again
Contact the Canon Customer Care Center.
Contact the Canon Customer Care Center.
Error codes are printed in the ACTIVITY REPORT.
LCD messages
For detailed information on LCD messages and error codes, refer to the User’s Guide.
If you cannot solve the problem
If you have a problem with your machine that you cannot solve with the information provided
in this chapter, contact the Canon Customer Care Center.
in this chapter, contact the Canon Customer Care Center.
CAUTION
• If the machine makes strange noises, emits smoke or strange smells, unplug it immediately and
contact the Canon Customer Care Center. Do not attempt to disassemble or repair the machine
yourself.
yourself.
IMPORTANT
• Attempting to repair the machine yourself may void the limited warranty.
If you contact the Canon Customer Care Center, make sure you have the following information
ready:
• Product name: MultiPASS MP730 or MultiPASS MP700
• Serial number (located on the label located at the back of the machine)
• Details of the problem
• Steps taken to try to resolve the problem and the results
ready:
• Product name: MultiPASS MP730 or MultiPASS MP700
• Serial number (located on the label located at the back of the machine)
• Details of the problem
• Steps taken to try to resolve the problem and the results