Canon pixma mp460 사용자 설명서
32
Chapter 2
Copying
Reducing Or Enlarging A Copy
You can reduce or enlarge copies.
1
Prepare for copying.
See page 31
2
Select the reduction/enlargement method.
The example below assumes that you will select <Zoom (25 - 400%)>.
(1) Press [Settings].
(2) Use [ ] or [ ] to select <Tab 1>.
(3) Use [ ] or [ ] to select <Magnification>, and use [ ] or [ ] to select
(2) Use [ ] or [ ] to select <Tab 1>.
(3) Use [ ] or [ ] to select <Magnification>, and use [ ] or [ ] to select
<Zoom (25 - 400%)>.
Specify the custom copy ratio for reducing or enlarging copies.
Specify the custom copy ratio for reducing or enlarging copies.
Besides <Zoom (25 - 400%)>, you can also choose from the following reduction/
enlargement methods.
enlargement methods.
(4) Press [ ] to move the cursor down, and use [ ] or [ ] to select the setting value.
Holding down [ ] or [ ] steps through the values faster.
3
Finalize your selection.
Press [Settings] to return to the Copy standby screen.
4
Start copying.
See page 31
<Same
magnification>:
magnification>:
Copies in the same size as an original.
<Preset ratio>:
Preset ratios are convenient when changing between standard page
sizes, for example, when reducing A4 to A5, or enlarging B5 to A4.
sizes, for example, when reducing A4 to A5, or enlarging B5 to A4.
<Fit-to-page>:
You can automatically reduce or enlarge the document to fit the size of
the paper which are loaded in the Auto Sheet Feeder.
the paper which are loaded in the Auto Sheet Feeder.
Note
When you choose <Fit-to-page>, the document size may not be detected
correctly depending on the document. In that case, choose <Preset ratio>
or <Zoom (25 - 400%)>.
correctly depending on the document. In that case, choose <Preset ratio>
or <Zoom (25 - 400%)>.
(3)