Canon pixma ip4300 사용자 설명서
64
Troubleshooting
Print Results Not Satisfactory
Cannot Print to End of Job
Part of the Page Is Not Printed
Ink Does Not Come Out/Printing Does Not Start/Printing Is Blurred/
Colors Are Wrong/Straight Lines Are Misaligned
Colors Are Wrong/Straight Lines Are Misaligned
Cause
Action
Size of the print data is extremely large
(Windows XP/Windows 2000 only).
(Windows XP/Windows 2000 only).
In Windows XP and Windows 2000, click Print Options on the Page Setup
sheet. Then, select the Reduce spool data size check box in the displayed
dialog.
Selecting Reduce spool data size may reduce the print quality.
sheet. Then, select the Reduce spool data size check box in the displayed
dialog.
Selecting Reduce spool data size may reduce the print quality.
Cause
Action
Page Size setting in the printer driver
does not match the actual size of the
paper loaded in the printer.
does not match the actual size of the
paper loaded in the printer.
If the Page Size setting, set in the application software you are printing from or
in the printer driver, does not match the actual size of the printing paper, part of
the page may not be printed.
Check the page size setting in your application. Then, check Page Size on the
Page Setup sheet in the printer properties dialog box of the printer driver
(Windows) or the Page Setup dialog box of the printer driver (Macintosh).
in the printer driver, does not match the actual size of the printing paper, part of
the page may not be printed.
Check the page size setting in your application. Then, check Page Size on the
Page Setup sheet in the printer properties dialog box of the printer driver
(Windows) or the Page Setup dialog box of the printer driver (Macintosh).
You are performing automatic duplex
printing.
printing.
When performing automatic duplex printing, the printable area at the top of the
page will be 0.08 inches / 2 mm narrower than the usual. For this reason, the
bottom of the page may not be printed. To prevent this, select Use reduced
printing from the printer driver.
page will be 0.08 inches / 2 mm narrower than the usual. For this reason, the
bottom of the page may not be printed. To prevent this, select Use reduced
printing from the printer driver.
Important
Reduced printing may affect the layout depending on your document.
(1)Open the printer properties dialog box.
(2)Click Print Area Setup in the Page Setup sheet and select Use reduced
(2)Click Print Area Setup in the Page Setup sheet and select Use reduced
printing.
(1)Open the Print dialog box.
(2)Select Duplex Printing & Margin in the pop-up menu.
(3)Select Automatic Duplex Printing and click Use reduced printing in Print
(2)Select Duplex Printing & Margin in the pop-up menu.
(3)Select Automatic Duplex Printing and click Use reduced printing in Print
Area.
Cause
Action
Ink tank is empty.
Open the Top Cover and check the ink lamps.
If an ink lamp is flashing red slowly at about 3-second intervals, ink is running
low. If an ink lamp is either flashing red fast at about 1-second intervals or is not
lit, the tank is empty.
Replace the ink tank, and close the Top Cover.
See “Replacing an Ink Tank” on page 26.
If an ink lamp is flashing red slowly at about 3-second intervals, ink is running
low. If an ink lamp is either flashing red fast at about 1-second intervals or is not
lit, the tank is empty.
Replace the ink tank, and close the Top Cover.
See “Replacing an Ink Tank” on page 26.
Note
For details on different flashing speeds, see “Replacing an Ink Tank” on
page 26.
page 26.