Canon pixma ip4300 사용자 설명서

다운로드
페이지 102
80
Troubleshooting
„
Error No.: 300 Is Displayed
„
Error No.: 1700 Is Displayed
Cause
Action
The printer is not ready.
Make sure that the printer is turned on, and that it is connected securely to the 
computer.
If the POWER lamp is off, turn the printer on.
While the POWER lamp is flashing green, the printer is initializing. Wait until the 
POWER lamp stops flashing and remains lit green.
When the ALARM lamp is flashing orange, an error may have occurred on the 
printer. For details on how to resolve the error, see “ALARM Lamp Flashes 
Orange” on page 76.
Printer is not connected properly.
Make sure that the USB cable is plugged in securely to the computer and the 
printer.
z
If you are using a relay device such as a USB hub, disconnect it, connect the 
printer directly to the computer, and try printing again. If printing starts 
normally, there is a problem with the relay device.
Consult the reseller of the relay device for details.
z
There could also be a problem with the USB cable. Replace the USB cable 
and try printing again.
Your printer is not selected in Printer 
on the Print dialog box.
Select iP4300 in Printer on the Print dialog box.
If iP4300 does not appear in Printer, follow the procedure below to check that 
the driver for your printer is installed to your computer. 
(1)Select Print and Fax Preferences from Printer.
In Mac OS X v.10.2.8 or 10.3.x, select Edit Printer List from Printer.
(2)Check that iP4300 is displayed in the list of printers and that the check box is 
selected.
In Mac OS X v.10.2.8, check that iP4300 is displayed in the Printer List.
(3)If iP4300 is not displayed, click Add(+) to add the printer.
If you cannot add the printer, follow the procedure described in the Easy Setup 
Instructions
 to reinstall the printer driver.
Cause
Action
The ink absorber is almost full.
The printer has a built-in ink absorber to hold the ink used during Print Head 
Cleaning, for example.
This error message indicates that the ink absorber is nearly full.
Press the RESUME/CANCEL button to cancel the error so you can continue 
printing.
Before the ink absorber becomes completely full, contact a Canon service 
representative. (You will need to replace a particular part of the printer.)
Important
Canon recommends that you call for service as soon as this error occurs. Once 
the ink absorber becomes completely full, printing cannot be performed until the 
ink absorber is replaced.