Canon pixma mx700 사용자 가이드

This section describes how to set up the machine to be used over wired LAN, when the machine has 
not been connected to the network. This setup procedure requires settings to be performed on the 
machine and the computer.

On the Canon IJ Network Tool screen, 
select LAN connection, then click OK.

If the Canon IJ Network Tool does not start up 
automatically, select Library > Printers > Canon > 
BJPrinter > Utilities > Canon IJ Network Tool.

If the screen shown on the right appears, make 
sure of the following and click OK.
– The machine is turned on.

– The machine is connected to the computer with a 

USB cable.

– The MP Drivers have been installed.

Select Setup in the pop-up menu, select your 
machine’s name in Printers, then click OK. 

If you select USB connection, the Canon IJ Network 

Tool will exit without setting up the machine to be used 

over LAN.

z

If no printer is detected, click OK. Make sure that 

the machine is connected to the computer with a 

USB cable and turned on, then click Update.

z

If the machine’s network settings are already 

configured, the Setup Environment Confirmation 

dialog box appears asking for your confirmation to 

use the machine with the current settings. You can 

proceed with the setup using the current network 

settings. To do so, click Use as is. To reconfigure 

the network settings, click Reconfigure.