Canon pixma mx700 사용자 가이드

After the MP Drivers are installed, start up the 
Canon IJ Network Tool to mount the Card Slot.

For details on the network setup of the Card Slot, 
refer to “Using the Card Slot over a Network” in the 
User’s Guide on-screen manual.

This section describes how to set up an additional computer to use the machine over wired LAN, 
when the machine has already been set up to connect to the network using another computer. This 
setup procedure only requires settings to be performed on the additional computer.

Make sure that the machine is connected to 
the network device with a LAN cable.

On the Canon IJ Network Tool screen, 
select LAN connection, then click OK.

If the Canon IJ Network Tool does not start up 
automatically, select Library > Printers > Canon > 
BJPrinter > Utilities > Canon IJ Network Tool.

When the screen shown on the right appears, 
click OK.

z

To confirm the machine’s MAC address, display the 

machine’s network setting information referring to 

“Displaying and Initializing Network Settings” in the 

User’s Guide on-screen manual.

z

For details on how to scan, refer to the User’s 

Guide and Scanning Guide on-screen manuals.

z

If MAC or IP address filtering is configured to restrict 

access to the machine, make sure beforehand to 

register those addresses of the computer you are 

setting up. To register the addresses, use the Canon 

IJ Network Tool on the computer that has already 

been set up.

z

Make sure that the computer you are setting up is 

not connected to the machine with a USB cable. 

This setup procedure does not involve connecting 

the USB cable.

If you select USB connection, the Canon IJ Network 

Tool will exit without setting up the machine to be used 

over LAN.