Canon pixma mx700 사용자 가이드

This section describes how to set up the machine to be used over wired LAN, when the machine has 
not been connected to the network. This setup procedure requires settings to be performed on the 
machine and the computer.

On the Setup Method screen, select Set up 
the printer and the computer for network 
use, then click Next. 

When the Printer Connection screen 
appears, connect the machine to the 
computer with a USB cable, then turn on the 
machine. 

When the machine is turned on, the Power lamp 
lights up green. When the computer detects the 
machine, the next screen will appear automatically.
When using Windows 2000:
When you connect the machine to the computer 
with a USB cable, a message asking for your 
confirmation to restart your computer is displayed. 
Click Yes. Then when an error message is 
displayed, click OK to proceed with the installation.

When the Setup Preparations dialog box 
appears, confirm that preparation is 
complete, then click Next.

If you select Use the printer via USB, the machine is 

set up to be used with USB connection.

z

To set up the machine that is not yet connected to a 

LAN, connect the machine and the computer with a 

USB cable.

z

If you cannot go to the next procedure after 3 

minutes, refer to “Cannot Install the MP Drivers” in 

“Troubleshooting” in the User’s Guide on-screen 

manual.

If the machine’s network settings are already 

configured, the Setup Environment Confirmation 

dialog box appears asking for your confirmation to use 

the machine with the current settings. You can 

proceed with the setup using the current network 

settings. To do so, click Use it as is. To reconfigure the 

network settings, click Reconfigure.