Canon PowerShot SD30
109
A
p
p
p
endi
x
x
You can recharge the battery using Battery Charger CB-2LV/CB-2LVE
(sold separately).
(sold separately).
It takes approximately 90 minutes to fully charge the battery
from a fully discharged state (Based on Canon’s testing
standards).
- Charging it within a temperature range of 5 °C to 40 °C (41
from a fully discharged state (Based on Canon’s testing
standards).
- Charging it within a temperature range of 5 °C to 40 °C (41
°F to 104 °F) is recommended.
- Charge times may vary according to the ambient
temperature and the battery’s charge state.
Using the Battery Charger (Sold Separately)
1
Insert the battery pack
into the battery charger.
2
Battery charger model
names and types vary by
region.
(For CB-2LV)
Plug the battery charger into a
power outlet.
(For CB-2LVE)
Attach the power cord to the battery
charger and plug it into a power outlet.
Plug the battery charger into a
power outlet.
(For CB-2LVE)
Attach the power cord to the battery
charger and plug it into a power outlet.
The charge indicator will light orange while the battery is
charging. It will change to green when the charge is com-
plete.
plete.
After charging, unplug the battery charger and immediately
remove the battery.
To protect the battery and prolong its life, do not charge it for
longer than 24 hours continuously.
longer than 24 hours continuously.
Symbol
Align the
on the battery and
battery charger and insert it correctly.
Charge Indicator
170CUGBook(Basic-Advanced).book Page 109 Tuesday, June 21, 2005 10:02 PM