Canon PowerShot SD30
25
Befo
re Usin
g t
h
h
e Cam
era—Bas
ic Op
eratio
ns
This camera is equipped with a power saving function. The power
will shut off in the following circumstances. Press the power button
again to restore power.
will shut off in the following circumstances. Press the power button
again to restore power.
* This time can be changed.
The power saving function will not activate during a slide
show or while the camera is connected to a computer.
The power saving function settings can be changed (p. 33).
show or while the camera is connected to a computer.
The power saving function settings can be changed (p. 33).
Power Saving Function
Shooting Mode
Powers down approximately 3 minutes after the last
control is accessed on the camera. The LCD monitor
automatically turns off 1 minute* after the last control is
accessed even if [Auto Power Down] is set to [Off].
Press any button other than the power button or change
the camera orientation to turn the LCD monitor back on.
control is accessed on the camera. The LCD monitor
automatically turns off 1 minute* after the last control is
accessed even if [Auto Power Down] is set to [Off].
Press any button other than the power button or change
the camera orientation to turn the LCD monitor back on.
Playback Mode
Connected to a Printer
Connected to a Printer
Powers down approximately 5 minutes after the last
control is accessed on the camera.
control is accessed on the camera.
170CUGBook(Basic-Advanced).book Page 25 Tuesday, June 21, 2005 10:02 PM