Canon PowerShot SD30
43
Shooting
With the camera held vertically, you can release the shutter by
pressing the FUNC./SET button in place of the shutter button. You
can also shoot with the shutter button.
pressing the FUNC./SET button in place of the shutter button. You
can also shoot with the shutter button.
To use the FUNC. menu (p. 29) to make settings, hold the
camera horizontally.
camera horizontally.
Shooting Vertically
(Vertical Shutter Release)
Shooting Mode
1
(Rec.) Menu [Vert. Shutter] [On].
See Menus and Settings (p. 30).
The default setting is [On].
2
Select a shooting mode.
3
Hold the camera verti-
cally, aim at the subject
and press the FUNC./SET
button.
Unlike the shutter button, this but-
ton does not have a halfway
stage. When the camera focuses,
it will beep twice and record the
image immediately.
stage. When the camera focuses,
it will beep twice and record the
image immediately.
To review the image immediately
after taking the shot, continue to
hold the FUNC./SET button. This
overrides the Review setting
(p. 31).
hold the FUNC./SET button. This
overrides the Review setting
(p. 31).
Displays when using
Vertical Shutter Release
Vertical Shutter Release
170CUGBook(Basic-Advanced).book Page 43 Tuesday, June 21, 2005 10:02 PM