Canon SX40 HS 사용자 설명서
9
Use the included charger to charge the battery. Be sure to charge the battery
as it is not charged at the time of purchase.
as it is not charged at the time of purchase.
Remove the cover.
Insert the battery.
z
Align the S marks on the battery and
charger, then insert the battery by sliding it
in (
charger, then insert the battery by sliding it
in (
) and down (
).
Charge the battery.
z
For CB-2LC: Flip out the plug (
) and
plug the charger into a power outlet (
).
z
For CB-2LCE: Plug the power cord into
the charger, then plug the other end into a
power outlet.
the charger, then plug the other end into a
power outlet.
X
The CHARGE lamp lights and charging
starts.
starts.
X
The FULL lamp will light when charging
has finished. Charging takes approx.
1 hour and 50 minutes.
has finished. Charging takes approx.
1 hour and 50 minutes.
Remove the battery.
z
Unplug the battery charger from the power
outlet, then remove the battery by sliding it
in (
outlet, then remove the battery by sliding it
in (
) and up (
).
Charging the Battery
CB-2LC
CB-2LCE
To protect the battery and prolong its life, do not charge it for longer than
24 hours continuously.
24 hours continuously.
COP
Y