Nikon COOLPIX 4500 관리 매뉴얼
VAA11901-R.3579.A
- A5・E4500 -
PW1
Board holder
CA3
SY1
Connector ⑤
TB2
Battery cover
Shaft
Battery holder
Battery
terminal
terminal
Spacer
Connector ⑩
①
②
②
③
Spring
Holder cover
• Set the spring.
• Attach the holder cover with
the 2 hooks marked ○ and the 2
screws
• Attach the holder cover with
the 2 hooks marked ○ and the 2
screws
①
(1.7 x 3.5).
• Attach the battery contact with
the 2 screws
the 2 screws
②
(1.7 x 2.5).
• Attach the TB2 PCB with the
screw
screw
③
(1.7 x 3.5).
• Apply a piece of insulation tape
and arrange the wires.
• Attach the battery cover with the
shaft.
• Attach the PW1 PCB with the
screw
and arrange the wires.
• Attach the battery cover with the
shaft.
• Attach the PW1 PCB with the
screw
④
(1.7 x 3.5) and connect
the connector
⑤
.
• Attach the CA3 PCB with the
connector
connector
⑥
and attach the board
holder with the 2 screws
⑦
(1.7 x
3.5).
• Attach the SY1 PCB with the
connector
• Attach the SY1 PCB with the
connector
⑧
and attach the screw
⑨
(1.7 x 3.5).
• Attach the connector
⑩
.
[Arrangement of wires]
④
Connector ⑥
⑦
⑦
⑨
①
Connector ②
Connector ③
• Set the projection on the bottom
of the battery holder and the holes
on the tripod socket to attach the
body unit to the joint part.
• Attach the 2 screws
of the battery holder and the holes
on the tripod socket to attach the
body unit to the joint part.
• Attach the 2 screws
①
(1.7 x 3.5).
• Connect the connector
②
(3pieces)
and the connector
③
.
Connector ⑧
6. CA3, PW1, SY1, TB2, Battery holder
7. Lens unit and body unit