Nikon coolpix l15 사용자 설명서

Insert the Batteries

First S

te

p

s

B

Turn the camera off and make sure that the power-on lamp and the monitor have gone out before 
opening the battery-chamber/memory card slot cover.

B

• Read and follow the warnings and cautions (A iii, 98).
• Do not combine old and new batteries or batteries of different makes or types.
• Batteries with the following defects cannot be used:

B

To improve battery performance, select the type of battery currently inserted in the camera in the 
setup menu. The default setting is the type of battery supplied with purchase. If your camera was 
purchased in Europe and alkaline batteries were supplied, change the setting to [Alkaline]. When 
any other type of battery is used, turn the camera on and change the setting (

C

Performance of alkaline batteries may vary greatly depending on the manufacturer. Choose a 
reliable brand.

C

To power the camera continuously for extended periods, use an EH-65A AC adapter (available 
separately) (

A 95). Do not, under any circumstances, use another make or model of AC 

adapter. Failure to observe this precaution could result in overheating or in damage to the camera.

D

If no operations are performed for about five seconds, the monitor will dim to save power. Using any 
of the camera controls will reactivate the display. The monitor turns off if no operations are 
performed for thirty seconds (default setting). The camera enters standby mode.

After a further three minutes, the camera will turn off automatically (

A 88).

Batteries with peeling

Batteries with insulation that 
does not cover the area 
around the negative terminal.

Batteries with a flat 
negative terminal