Nikon DS-2MBWC 사용자 설명서
VIII
Troubleshooting
1 Power Supply
- 157 -
VIII
Troubleshooting
If you experience any problems, check the troubleshooting list below.
If you are still not able to resolve the problem, consult with your nearest Nikon representative.
If you are still not able to resolve the problem, consult with your nearest Nikon representative.
1
Power Supply
Symptom Corrective
action
The power does not
come on.
• Make sure the power cord is plugged firmly into an AC outlet at one
end and the DS AC adapter and then the DC-IN connector on the
DS-L1 main unit on the other.
DS-L1 main unit on the other.
• Use the power cord supplied with the system.
• Turn on the POWER switch.
The main unit is hot
to the touch.
• The main unit temperature may increase when used in a hot or
confined space. If the high temperature is accompanied by a burnt
smell or other offensive smells, turn off the switch, unplug the power
cord and ask for repair.
smell or other offensive smells, turn off the switch, unplug the power
cord and ask for repair.