Samsung ASBH500JBECSTA 사용자 설명서

Thank you for purchasing the Samsung Bluetooth 

Stereo Headset SBH500, we hope you will be delighted 

with its operation.

Take a moment before you get started to familiarize 

yourself with your new headset.

Make sure you have the following items with your 

headset: Travel adapter, User’s Guide 

Make sure you have the following items with your 

headset: Travel adapter, User’s Guide 

Charge the headset's battery fully before using 

the headset for the first time.

1 

 Open the adapter jack cover and plug the

    travel adapter into the adapter jack.

2 

 Plug the travel adapter into the AC wall

    outlet.

• Charge the headset until the red light on the  

   headset turns to blue.

• The headset will be fully charged in approximately

   3 hours.

Before you can use your headset, you must pair it 

with your phone.

1 

 Set your Bluetooth phone to discover the  

    headset by following your phone user’s guide. 
    Typically, the steps involve going to the Settings,

    Connection, or Bluetooth menu on your 

    phone and then selecting the option to discover

    Bluetooth devices.
    Your phone will find the Samsung SBH500 

    headset. 

2 

 Select Samsung SBH500. 

3 

 When the phone asks if you want to pair with it,

    confirm by selecting Yes or OK. 

4 

 Enter the headset passkey or PIN, 0000. 

Your phone and headset are now paired and 

ready to make and receive calls. To confirm 

they are operating properly, make a call:

1

 

 Place the headset over your ear. 

    See Wear the headset on the reverse 

    side of this guide.

2

 

 On your phone, make a call to the number 

    you want.

3

 

 If your phone and headset are successfully 

    paired, you will hear ringing on the headset.

After you have successfully paired your phone 

and headset, you do not need to repeat these 

initial setup steps each time you use the 

headset.

• If you turn on the headset for the first time, 

   it proceeds into pairing mode immediately.

     

• If you have paired the headset with other 

   Bluetooth devices, make sure that the headset 

   is off (see Turn headset on or off on the reverse 

   side of this guide). Then turn on the headset with 

   pressing and holding     . After the indicator 

   sequentially flashes blue, red, and purple twice, 

   it will turn to blue.

 

Talk button

REW Button

FF Button

Play/Pause/

Stop Button

Indicator

 Light

ON/OFF

 Switch

Adapter

 jack

Volume Control 

Buttons

NOTES:

• The headset cannot be used while charging.

• Use only a Samsung-approved charger or adapter.

NOTE:

The items supplied with your headset and the accessories 

at your Samsung dealer may vary, depending on you 

country or service provider.

Start here

Charge your headset
Put your headset in pairing mode
Turn on Bluetooth on your phone and 
pair with headset
Test and use

Guide No.: GH68-xxxxxA

09/2007. Rev. 1.0

1301 East Lookout Drive Suite 150 

Richardson, TX 75082  

http://www.samsungmobileusa.com/

accessories

1-888-987-4357