Sony 3-097-194-15(1) 사용자 설명서

CMT-DH3.GB.3-097-194-11(1)

Additional I

nf

or

ma
tion

Should you encounter a problem with 

your system, do the following:

Make sure the power cord and 

speaker cords are connected 

correctly and firmly.

Find your problem in the 

troubleshooting checklist below and 

take the indicated corrective action.

If the problem persists after doing all 

of the above, consult your nearest Sony 

dealer.

Immediately unplug the power cord, 

and check the following items.

 If your system has a voltage 

selector, is the voltage selector set 

to the correct voltage?

 Are you using only the supplied 

speakers?

 Is anything blocking the ventilation 

holes on the rear of the system?

After the STANDBY indicator 



 

stops flashing, reconnect the power 

cord, and turn on the system. If the 

issue persists, contact your nearest 

Sony dealer.

The clock or timer setting is canceled.
 The power cord is disconnected or a 

power failure occurred. Redo “Setting 

the clock” (page 23). If you have set 

the timer, redo “Waking up to music” 

(page 73).

“– –:– –” appears in the display.
 A power failure has occurred. Set the 

clock (page 23) and timer settings 

(page 73) again.

There is no sound.
 Press VOLUME + 



 repeatedly.

 The headphones are connected to the 

PHONES jack 



.

 Check the speaker connections 

(page 18).

 The system is in pause mode, in Slow-

motion Play or in Lock Search. Press 

 



 (or DVD  



 on the unit) to 

start the playback.

There is no microphone sound.
 Press VOLUME + 



 repeatedly or 

turn MIC LEVEL 



 on the unit 

clockwise to adjust the microphone 

volume.

 Make sure the microphone is 

connected to the MIC jack 



 

correctly.

