Sony bravia dav-hdx589w 사용자 설명서

다운로드
페이지 116
70
US
Using the Control for 
HDMI Function for 
“BRAVIA” Sync
This function is available on TVs with the 
“BRAVIA” Sync function only.
By connecting Sony components that are 
compatible with the Control for HDMI function 
with an HDMI cable, operation is simplified as 
below:
– Theater Mode (page 71)
– One-Touch Play (page 71)
– System Power Off (page 71)
– System Audio Control (page 71)
– Volume Limit (page 72)
– Language Follow (page 72)
Control for HDMI is a mutual control function 
standard used by CEC (Consumer Electronics 
Control) for HDMI (High-Definition 
Multimedia Interface).
The Control for HDMI function will not work in 
the following cases:
– When you connect this system to a 
component which is not compatible with the 
Control for HDMI function.
– A component does not have an HDMI jack.
There are convenient buttons on the system’s 
remote for operating the TV, such as 
THEATER, ONE-TOUCH PLAY, TV [/1. For 
details, see “Controlling the TV with the 
Supplied Remote” (page 81)
 and refer to the 
operating instructions of the TV.
Note
• Depending on the connected component, the Control 
for HDMI function may not work. Refer to the 
operating instructions supplied with the component.
• The Control for HDMI function may not work if you 
connect a component other than a Sony component, 
even if the component is compatible with the Control 
for HDMI function.
(Control for HDMI - Easy Setting)
The system is compatible with the Control for 
HDMI - Easy Setting function. If the TV is 
compatible with the Control for HDMI - Easy 
Setting function, you can set the system’s 
[CONTROL FOR HDMI] function 
automatically by setting the TV. For details, 
refer to the operating instructions of the TV.
If the TV is not compatible with the Control for 
HDMI - Easy Setting function, set the Control 
for HDMI function of the system and TV 
manually.
1
Make sure that the system and the TV 
are connected with an HDMI cable.
2
Turn on the TV and press [/1 to turn on 
the system.
3
Switch the input selector on your TV so 
that the signal from the system through 
the HDMI input appears on the TV 
screen.
4
Set the Control for HDMI function of the 
system and TV.
For details of the system settings, see the 
following Steps. For details of the setting of 
the TV, refer to the operating instructions of 
the TV (depending on the TV, the default 
setting of the Control for HDMI function 
may be set to off).
To set the [CONTROL FOR HDMI] 
function to on/off
1
Press FUNCTION +/– repeatedly until 
“DVD” appears in the front panel 
display.
Control for HDMI/External Audio 
Device
THEATER
BRAVIA Sync
ONE-TOUCH
PLAY
TV
Preparing the Control for HDMI 
function