Sony bravia kdl-40nx803 사용자 설명서

GB

Refer to the supplied Table-Top Stand leaflet 
for proper attachment for some TV models.

~

• For best picture quality, do not expose the screen 

to direct illumination or sunlight.

• If the TV is brought directly from a cold to a warm 

location, or is placed in a very damp room, or is 
placed in a room in which heating has just been 
turned on, moisture may condense on the surface 
or inside the TV. Should this occur, turn off the 
TV and leave the TV off until the moisture 
evaporates, and then the TV can be used. If you 
notice moisture condensation between the glass 
panel and the LCD, turn on the TV and the 
condensation will evaporate after the TV has 
warmed up.

Place the TV set on the Table-Top 
Stand.

Fix the TV to the Table-Top Stand 
according to the arrow marks 

 that 

guide the screw holes using the 
supplied screws.

~

• If using an electric screwdriver, set the tightening 

torque at approximately 1.5 N·m {15 kgf·cm}.

After all the screws are tightened, 
attach the supplied stand rear cover to 
the Table-Top Stand.

Align with the two dowels of the Table-
Top Stand, and gently place the TV, 
checking the f mark is facing the front.

Attach the TV and Table-Top Stand 
with the supplied screw and hexagon 
wrench.

~

• Set the torque setting to approximately 3 N·m {30 

kgf·cm}.

Attach to the original position using the 
removed screws. See “Detaching the Table-
Top Stand form the TV” (page 9).