Sony CDP-CA80ES 사용자 설명서
Recording From CDs
16
Recording Your Own Program
You can record the program you’ve created on a tape,
etc. The program can contain up to 32 steps.
By inserting a pause during programming, you can
divide the program into two for recording on both
sides of a tape.
etc. The program can contain up to 32 steps.
By inserting a pause during programming, you can
divide the program into two for recording on both
sides of a tape.
1
Create your program (for side A when recording
on a tape) while checking the total playing time
indicated in the display.
Follow Steps 1 through 4 in “Creating a program
on the player” on page 13.
The
on a tape) while checking the total playing time
indicated in the display.
Follow Steps 1 through 4 in “Creating a program
on the player” on page 13.
The
A
indication appears in the display.
2
When you record on both sides of the tape,
press P to insert a pause.
The “PAUSE” and
press P to insert a pause.
The “PAUSE” and
A
B
indications appear in the
display and the playing time is reset to “0.00.”
When you record on one side of the tape, skip this
step and go to Step 4.
When you record on one side of the tape, skip this
step and go to Step 4.
A pause is counted as one step
You can program up to 31 steps when you insert a pause.
3
Repeat Steps 2 through 4 in “Creating a program
on the player” to create the program for side B.
on the player” to create the program for side B.
4
Start recording on the deck and then press ( (the
indicator lights up green) on the player.
When you record on both sides of the tape, the player
pauses at the end of the program for side A.
indicator lights up green) on the player.
When you record on both sides of the tape, the player
pauses at the end of the program for side A.
5
When you record on side B, reverse the tape and
press ( or P on the player to resume playing.
press ( or P on the player to resume playing.
You can check and change your program
See page 15.
The
The
A
indication appears while checking the program
for side A and
B
while checking the program for side
B.
PROGRAM
DISC 1 – 5
P
(
Fading In or Out
Z
You can manually fade the sound in or out to prevent
tracks from starting or ending abruptly.
Note that you cannot use this effect when you use the
DIGITAL OUT (OPTICAL) connector.
tracks from starting or ending abruptly.
Note that you cannot use this effect when you use the
DIGITAL OUT (OPTICAL) connector.
FADER
0/)
Press FADER
During pause.
FADE
lights up in
the display and the Q indication
flashes. The play fades in.
flashes. The play fades in.
When you want to start fading out.
FADE
lights up in the display and
the q indication flashes. The play
fades out and the player pauses.
fades out and the player pauses.
To
Start play fading in
End play fading out
Note
Fading lasts for about 5 seconds. However, when you press
the FADER button during Music Scan (see page 11), the play
fades out for about 2 seconds.
the FADER button during Music Scan (see page 11), the play
fades out for about 2 seconds.
Changing the fading time
You can change the fading time from 2 to 10 seconds
before fading in or out. If you don’t change it, fading
lasts for 5 seconds.
before fading in or out. If you don’t change it, fading
lasts for 5 seconds.
1
Press FADER before you start playing.
“FADE 5 SEC” appears in the display.
“FADE 5 SEC” appears in the display.
2
Press 0/) to specify the fading time.
I /
u
Recording From CDs