Sony CHC-CL5MD 사용자 설명서
21
MD
–
Recording
Marking track numbers
• Automatically during recording
Track numbers are automatically marked as on
the original source during recording from this
system’s CD player or components connected
to CD DIGITAL IN jack. Use the Level
Synchro Recording function to automatically
mark track numbers during recording from this
system’s tuner or components connected to the
VIDEO (AUDIO) IN jacks.
the original source during recording from this
system’s CD player or components connected
to CD DIGITAL IN jack. Use the Level
Synchro Recording function to automatically
mark track numbers during recording from this
system’s tuner or components connected to the
VIDEO (AUDIO) IN jacks.
• At any point during recording
You can mark track numbers during recording
of any source.
of any source.
• After recording
Use the Divide Function (see “Dividing
recorded tracks” on page 29).
recorded tracks” on page 29).
Marking track numbers
automatically during recording
— Level-Synchro Recording
The Level Synchro Recording function is
factory set to on, so the track numbers are
automatically marked. If “LEVEL-SYNC”
does not appear during recording, turn on the
Level Synchro Recording as follows. Track
numbers are automatically marked when the
input signal is continuously below a certain
level for more than two seconds and then
exceeds that level.
factory set to on, so the track numbers are
automatically marked. If “LEVEL-SYNC”
does not appear during recording, turn on the
Level Synchro Recording as follows. Track
numbers are automatically marked when the
input signal is continuously below a certain
level for more than two seconds and then
exceeds that level.
Notes
• You cannot mark track numbers automatically if the
sound source to be recorded is noisy (e.g., tapes or
radio programmes) or during timer-recording.
radio programmes) or during timer-recording.
• If you pause recording during CD recording, a track
number is recorded at that point. Also, note that the
tracks might be recorded as the same single track
with a single track number when the same single
track of the same CD is recorded repeatedly.
tracks might be recorded as the same single track
with a single track number when the same single
track of the same CD is recorded repeatedly.
1
Press MD REC to stand by for recording.
2
Press MENU/NO.
3
Turn
./>
(or press
.
or
>
on
the remote) until “Setup ?” appears, then
press ENTER/YES.
press ENTER/YES.
4
Turn
./>
(or press
.
or
>
on
the remote) until “T.Mark Off” (or “T.Mark
LSync”) appears, then press ENTER/YES.
LSync”) appears, then press ENTER/YES.
5
Turn
./>
(or press
.
or
>
on
the remote) to select the setting, then press
ENTER/YES.
ENTER/YES.
To
Select
Turn on the Level
Synchro Recording
function
Synchro Recording
function
T.Mark LSync
(factory setting)
(factory setting)
Turn off the Level
Synchro Recording
function
Synchro Recording
function
T.Mark Off
When you set the Level Synchro Recording
function, “LEVEL-SYNC” lights up.
function, “LEVEL-SYNC” lights up.
6
Press MENU/NO.
To continue and record, follow the
procedures described on the various
recording pages.
procedures described on the various
recording pages.
continued