Sony CHC-CL5MD 사용자 설명서
38
Tape – Recording
Recording a CD on a tape
— CD-TAPE Synchro Recording
1
Load a blank tape.
2
Load a CD you want to record.
3
Press SYNCHRO MODE repeatedly until
“CD
“CD
t
TAPE SYNC?” appears.
4
Press ENTER/START.
The tape deck stands by for recording and
the CD player pauses for play.
When you want to record on the bottom
side, press TAPE n N.
the CD player pauses for play.
When you want to record on the bottom
side, press TAPE n N.
5
Press PLAY MODE/DIRECTION
repeatedly until
repeatedly until
g
appears to record
on one side or
h
(or
j
) to record on
both sides.
6
Press ENTER/START.
Recording starts.
To stop recording
Press x.
Tips
• When you record on both sides, be sure to start
from the top side. If you start from the bottom side,
recording stops at the end of the bottom side.
recording stops at the end of the bottom side.
• If you select both sides recording and the tape
reaches the end of the top side part-way through a
track, the entire track is recorded again from the
beginning of the bottom side.
track, the entire track is recorded again from the
beginning of the bottom side.
• You can record only your favourite CD tracks with
Programme Play. After step 2, follow the same
procedures as step 1 to 6 in “Programming CD
tracks” on page 11. Then go to step 3.
procedures as step 1 to 6 in “Programming CD
tracks” on page 11. Then go to step 3.
Recording on an MD and a
tape at the same time
tape at the same time
Place the CD you want to record.
Then, insert a blank tape and a recordable
MD. Press SYNCHRO MODE repeatedly
until “DUAL SYNC?” appears, then press
ENTER/START twice.
Then, insert a blank tape and a recordable
MD. Press SYNCHRO MODE repeatedly
until “DUAL SYNC?” appears, then press
ENTER/START twice.
To stop recording
Press x.
Tips
• Even if the MD or the tape ends part-way through
the recording, the other continues recording.
• If you select both sides recording and the tape
reaches the end of the top side part-way through a
track, the entire track is recorded again from the
beginning of the bottom side. In this case, the entire
track may also be recorded again on the MD.
track, the entire track is recorded again from the
beginning of the bottom side. In this case, the entire
track may also be recorded again on the MD.
• You can record only your favourite CD tracks with
Programme Play. After inserting a blank tape and a
recordable MD, follow the same procedures as step
1 to 6 in “Programming CD tracks” on page 11.
Then press SYNCHRO MODE.
recordable MD, follow the same procedures as step
1 to 6 in “Programming CD tracks” on page 11.
Then press SYNCHRO MODE.