Sony CMT-CPX1 사용자 설명서

다운로드
페이지 28
14
GB
You can wake up to music at a preset time. Make 
sure you have set the clock (see “Setting the 
clock” on page 5).
1
Prepare the sound source you want to 
play.
• CD: Load a disc. To start from a specific 
• TAPE: Load a tape (see “Playing a tape” 
• TUNER: Tune in the preset radio station 
2
Press VOL + or – to adjust the volume.
3
Press CLOCK/TIMER SET.
4
Press 
.
 or 
>
 repeatedly until 
“DAILY” appears, then press ENTER.
“ON TIME” appears and the hour 
indication flashes.
5
Set the time to start playing.
Press . or > repeatedly to set the 
hour, then press ENTER.
The minute indication flashes.
Press . or > repeatedly to set the 
minute, then press ENTER.
6
Set the time to stop playing following 
the same procedure as step 5.
7
Press 
.
 or 
>
 repeatedly until the 
desired sound source appears.
Each time you press the button, the display 
changes cyclically as follows: 
8
Press ENTER.
The start time, the stop time, the sound 
source and VOLUME appear in turn, then 
the original display returns.
9
Press 
?/1
 to turn off the system.
Other operations
Notes
• The Daily Timer setting or the Timer Recording 
setting overlaps with part or all of another timer 
setting.
• If you use the Daily Timer and the Sleep Timer at the 
same time, the Sleep Timer has priority.
• Do not operate the system from the time the system 
turns on until the play starts (about 15 seconds before 
the preset time).
• If the system is on about 15 seconds before the preset 
time, the Daily Timer will not be activated.
• You cannot use the optional component connected to 
MD (VIDEO) IN jacks as the sound source for Daily 
Timer.
• When the Daily Timer is set to “OFF”, “SELECT” 
does not appear. However, “SELECT” does appear 
when the Timer Recording is set to “ON”.
Waking up to music
— Daily Timer
TUNER 
CD PLAY 
T
TAPE PLAY 
T
To
Do this
Cancel the timer/
activate the timer/
check the settings
1
Press CLOCK/TIMER 
SELECT.
2
Press 
.
 or > 
repeatedly until “SELECT” 
appears, then press ENTER.
3
Press 
.
 or > 
repeatedly until “DAILY”, 
“ON” or “OFF” appears, 
then press ENTER.
Change the setting
Start over from step 1.
Cancel both Daily 
Timer and Timer 
Recording
1
Press CLOCK/TIMER 
SELECT.
2
Press 
.
 or > 
repeatedly until “OFF” 
appears, then press ENTER.