Sony CMT-DF1 사용자 설명서

다운로드
페이지 52
24
GB
1
Press SETUP in stop mode.
The Setup Menu appears.
2
Press 
< or , repeatedly to select 
“Audio Setup Page,” then press 
ENTER. 
3
Press 
M or m repeatedly to select 
“Speaker Setup” or “SPDIF Setup,” 
then press ENTER.
4
Press ENTER again.
5
Press 
M or m repeatedly to select a 
setting, then press ENTER.
6
Press SETUP to turn off the Setup 
Menu.
Speaker Setup
x Downmix
When playing 5.1 channel sound, this switches 
how the rear speaker sound is output from the 
system speakers.
The default setting is underlined.
SPDIF Setup
x SPDIF Output
This switches the method for outputting 5.1 
channel sound from the DIGITAL OUT 
(OPTICAL) jack on the back of the system.
The default setting is underlined.
Tip
You can reset all the settings except for Parental 
Control by performing the operations described under 
“To return the settings to the default settings*, perform 
reset as follows:” (page 40).
* Except for Parental Control settings
Adjusting the audio 
settings
— Audio Setup
LT/RT
Select this to mix the rear left and 
right channel sound to monaural 
and output it combined with each 
of the front left and right channels.
Stereo
Select this to output the rear left 
channel sound combined with the 
front left channel sound, and the 
rear right channel sound combined 
with the front right channel sound.
SPDIF Off
Sound is not output from the 
DIGITAL OUT (OPTICAL) jack.
SPDIF/RAW
Select this to enjoy 5.1 channel 
sound when an optional amplifier 
is connected (see “Enjoying the 
5.1 channel sound with the 
optional amplifier” (page 35)
).
SPDIF/PCM
Select this to enjoy 2 channel 
PCM sound when an optional 
amplifier is connected.