Sony CMT-BX30R 사용자 설명서

CMT-BX30R.GB.3-293-639-11(1)

CD Over: You have reached the end of 

the disc while pressing  



 during 

playback or pause.

Complete!: The preset operation ended 

normally.

LOCKED: The disc tray does not open. 

Contact your nearest Sony dealer.

No Disc: There is no disc in the system, 

or you have loaded a disc that cannot 

be played.

No Step: All of the programmed tracks 

or files have been erased.

Push SELECT!: You tried to set the clock 

or timer during timer operation.

Push STOP!: You pressed PLAY MODE 



 during playback.

Reading: The system is reading 

information of the disc. Some buttons 

are not available.

SET CLOCK!: You tried to select the timer 

when the clock is not set.

SET TIMER!: You tried to select the timer 

when the Play Timer is not set.

Step Full!: You tried to program more 

than 26 tracks or files (steps).

TIME NG!: The Play Timer start and end 

times are set to the same time.

Complete!: The audio file or folder on 

the USB device has been erased.

Device Full!: The USB device is full.

Erase Error!: Erase of audio files or 

folders on the USB device failed.

Error: The USB device could not be 

recognized or an unknown device is 

connected (page 28).

Fatal Error!: The USB device has been 

disconnected while recording to or 

erasing audio files or folders on the 

USB device.

FLDR Full: The number of folders on the 

USB device has reached the maximum.

No Device: No USB device is connected 

or the connected USB device has been 

stopped.

No Step: All of the programmed tracks 

or files have been erased.

No Track: No playable file is loaded in 

the system.

Not in Use: You have made an invalid 

operation.

Not Supported: An unsupported USB 

device is connected.

Please Wait: The system is readying for 

usage of an USB device.

Protected!: You tried to record or erase 

a write-protected USB device.

Reading: The system is recognizing the 

USB device.

REC Error!: Recording did not start, 

stopped partway, or otherwise could 

not be performed (page 26).

Removed: The USB device has been 

removed.

Step Full!: You tried to program more 

than 26 tracks or files (steps).

Storage Drive: An USB device is 

connected.

Track Full: The number of files on the 

USB device has reached the maximum.