Sony CMT-SE5 사용자 설명서
58
GB
Picture
There is no picture.
• Press FUNCTION repeatedly until “DVD” or
“VIDEO” appears.
• Check that the system is connected securely.
• The SCART cord is damaged. Replace it with a
new one.
• Make sure you connect the system to the input
jack of your TV (page 9).
• Make sure you turn on the TV and operate the TV
correctly.
• Make sure you select the video input on the TV so
that you can view the pictures from the system.
Picture noise appears.
• Try moving the system to a place without
vibration.
• Clean the disc.
• If video from your DVD player has to go through
your VCR to get to your TV, the copy-protection
applied to some DVD programs could affect
picture quality. If you still experience problems
after checking your connections, please try
connecting your DVD player directly to your TV
(page 9).
applied to some DVD programs could affect
picture quality. If you still experience problems
after checking your connections, please try
connecting your DVD player directly to your TV
(page 9).
The aspect ratio of the screen cannot be
changed even though you set “TV TYPE” in
“SCREEN SETUP” in the Setup Display when
you play a wide picture.
changed even though you set “TV TYPE” in
“SCREEN SETUP” in the Setup Display when
you play a wide picture.
• The aspect ratio is fixed on your DVD.
• Depending on the TV, you may not change the
aspect ratio.
Tuner
Severe hum or noise/stations cannot be
received. (“TUNED” or “ST” flashes in the
display.)
received. (“TUNED” or “ST” flashes in the
display.)
• Set the proper band and frequency (page 38).
• Connect the antenna properly (page 9).
• Find a place and an orientation that provide good
reception, then set up the antenna again. If you
cannot obtain good reception, we recommend you
connect a commercially available external
antenna.
cannot obtain good reception, we recommend you
connect a commercially available external
antenna.
• The supplied FM lead antenna receives signals
along its entire length, so make sure you extend it
fully.
fully.
• Locate the antennas as far away from the speaker
cords as possible.
• Consult your nearest Sony dealer if the supplied
AM antenna has come off the plastic stand.
• Try turning off surrounding electrical equipment.
A stereo FM program cannot be received in
stereo.
stereo.
• Press FM MODE until “MONO” disappears.
Optional components
There is no sound.
• Refer to General item “There is no sound.”
(page 55) and check the condition of the system.
• Connect the component properly (page 51) while
checking:
– if the cords are connected properly.
– if the cord plugs are firmly inserted all the way.
• Turn on the connected component.
• Refer to the operating instructions supplied with
the connected component and start playing.
• Check if proper function is selected.