Sony CMT-GPX5 사용자 설명서

masterpage:Left

filename[\\Nas-data-server\SONY Current jobs\SONY CMT-GPX7-GPX6-
GPX5\DTP\2067346111\206734611CMTGPX7CEL\GB11TRB-CEL.fm]

model name[CMT-GPX7/CMT-GPX6/CMT-GPX5]

[2-067-346-11(1)]

Play does not start.

• Eject the disc and check whether a disc is loaded.

• Wipe the disc clean (page 27).

• Replace the disc.

• Load the disc that this system can play (page 4).

• Load the disc correctly.

• Load the disc with the label side up.

• Remove the disc and wipe away the moisture on

the disc, then leave the system turned on for a few
hours until the moisture evaporates.

• Press N (or CD/NX on the unit) to start play.

Disc access takes a long time.

• Set “CD POWER” and “ON” by the CD power

manage function (page 13).

The sound skips.

• Wipe the disc clean (page 27).

• Replace the disc.

• Try moving the system to a place without

vibration (e.g., on top of a stable stand).

• Try moving the speakers away from the system, or

placing them on separate stands. When you listen
to a track with bass sounds at high volume, the
speaker vibration may cause the sound to skip.

Play does not start from the first track.

• Press PLAY MODE repeatedly until both “PGM”

and “SHUF” disappear to return to Normal Play.

MP3 audio track cannot be played back.

• CMT-GPX5 does not play MP3 audio.

• Recording was not performed according to the

ISO 9660 level 1 or level 2 format, or Joliet in the
expansion format.

• The MP3 audio track does not have the extension

“.MP3”.

• The data is not stored in MP3 format.

• Discs containing tracks other than MPEG1, 2

Audio Layer-3 files cannot be played.

MP3 audio tracks take longer to play back than
others.

• After the system reads all tracks on the discs,

playback may take more time than usual if:

– the number of albums or tracks on the disc is

very large.

– the album and track organization structure is

very complex.

The album title, track title and ID3 tag do not
appear correctly.

• Use a disc that conforms with ISO 9660 level 1,

level 2, or Joliet in the expansion format.

• The disc ID3 tag is not ver. 1 (ver. 1.0 or 1.1).

Tuner

Severe hum or noise/stations cannot be
received.

• Set the proper band and frequency (page 12).

• Connect the antenna properly (page 6).

• Find a place and an orientation that provide good

reception, then set up the antenna again. If you
cannot obtain good reception, we recommend you
connect a commercially available external
antenna.

• The supplied FM lead antenna receives signals

along its entire length, so make sure you extend it
fully.

• Keep the antennas away from the system and

other components.

• Consult your nearest Sony dealer if the supplied

AM antenna has come off the plastic stand.

• Try turning off surrounding electrical equipment.

• Set “CD POWER” and “OFF” by the CD power

manage function (page 13).

A stereo FM program cannot be received in
stereo.

• Press FM MODE until “MONO” disappears in

the display.

Tape deck

The tape does not record or play, or there is a
decrease in sound level.

• The heads are dirty. Clean them (page 28).

• The record/playback heads are magnetized.

Demagnetize them (page 28).

The tape does not erase completely.

• The record/playback heads are magnetized.

Demagnetize them (page 28).

There is excessive wow or flutter, or the sound
drops out.

• The capstans in the tape deck are dirty. Clean

them using a cleaning cassette (page 28).

Noise increases or the high frequencies are
erased.

• The record/playback heads are magnetized.

Demagnetize them (page 28).

The tape does not record.

• No cassette is loaded. Load a cassette.

• The tab has been removed from the cassette.

Cover the broken tab with adhesive tape
(page 28).

• The tape has wound to the end.