Sony CMT-DV2D 사용자 설명서
26
GB
To change the AM tuning interval
(except for European and
Russian models)
(except for European and
Russian models)
The AM tuning interval is factory-preset to
9 kHz (or 10 kHz for some areas). To change the
AM tuning interval, tune in any AM station first,
then turn off the system. While holding x on the
unit, press TUNER/BAND on the unit. When
you change the interval, all the AM preset
stations are erased. To reset the interval, repeat
the same procedure.
9 kHz (or 10 kHz for some areas). To change the
AM tuning interval, tune in any AM station first,
then turn off the system. While holding x on the
unit, press TUNER/BAND on the unit. When
you change the interval, all the AM preset
stations are erased. To reset the interval, repeat
the same procedure.
Note
You cannot change the AM tuning interval in Power
Saving Mode (page 34).
Saving Mode (page 34).
Tip
To improve broadcast reception, adjust the supplied
antennas, or connect a commercially available external
antenna.
antennas, or connect a commercially available external
antenna.
You can listen to a radio station either by
selecting a preset station, or by manually tuning
in the station.
selecting a preset station, or by manually tuning
in the station.
Listening to a preset station
— Preset Tuning
Preset radio stations in the tuner’s memory first
(see “Presetting radio stations” on page 25).
(see “Presetting radio stations” on page 25).
1
Press TUNER BAND repeatedly to
select “FM” or “AM”.
select “FM” or “AM”.
2
Press PRESET + or – repeatedly to
select the desired preset station.
select the desired preset station.
Listening to the radio
Frequency
Preset number