Sony CMT-SE9 사용자 설명서
48
GB
6
Press MENU/NO.
To continue recording, follow the
procedures described for each type of
recording.
procedures described for each type of
recording.
Other operations
* When the recording source is tape or radio program
and the track numbers are not marked properly
because of noise, set this level higher so that track
numbers are marked easily. The factory setting is
“–50 dB”.
because of noise, set this level higher so that track
numbers are marked easily. The factory setting is
“–50 dB”.
Notes
• Track numbers are not marked depending on the
track.
• Track numbers are not marked automatically if the
source sound to be recorded is noisy (e.g., tapes or
radio programs).
radio programs).
• When recording a CD, track numbers are marked
where you paused recording. In addition, the tracks
might be recorded as the same single track with a
single track number when the same single track of
the same CD is recorded repeatedly.
might be recorded as the same single track with a
single track number when the same single track of
the same CD is recorded repeatedly.
Smart Space:
Lets you make the blank spaces
between tracks 3 seconds long automatically
while making a digital recording from a CD. For
other types of recording, if the Smart Space
Function is on and there is no sound input for
about 3 seconds or more (but less than
30 seconds) while recording, the MD deck
replaces this silence with a blank of about
3 seconds and continues recording.
The Smart Space Function is factory set to on.
while making a digital recording from a CD. For
other types of recording, if the Smart Space
Function is on and there is no sound input for
about 3 seconds or more (but less than
30 seconds) while recording, the MD deck
replaces this silence with a blank of about
3 seconds and continues recording.
The Smart Space Function is factory set to on.
Auto Cut:
When the Smart Space Function is
on, if there is no sound input for 30 seconds or
more, the MD deck replaces this silence with a
blank of about 3 seconds and enters recording
pause.
more, the MD deck replaces this silence with a
blank of about 3 seconds and enters recording
pause.
To
Do this
Turn off the Level
Synchro Recording
Function
Synchro Recording
Function
In step 5, press . or >
repeatedly until “T.Mark Off”
appears, then press ENTER.
repeatedly until “T.Mark Off”
appears, then press ENTER.
Change the trigger
lever for Level
Synchro
Recording*
lever for Level
Synchro
Recording*
After step 3, press . or >
repeatedly until “LS(T)”
appears, then press ENTER.
Press . or > repeatedly to
select the level between –72 dB
and 0 dB (in 2 dB steps), press
ENTER, then press MENU/NO.
repeatedly until “LS(T)”
appears, then press ENTER.
Press . or > repeatedly to
select the level between –72 dB
and 0 dB (in 2 dB steps), press
ENTER, then press MENU/NO.
Making a space between
tracks 3 seconds long
automatically
tracks 3 seconds long
automatically
— Smart Space
No sound input for less than 30 seconds
Replaced with a blank of 3 seconds and
recording continues
recording continues
Off
On
No sound input for 30 seconds or more
Replaced with a blank of 3 seconds and
recording pauses
recording pauses
Off
On