Sony CRX - 160E 사용자 설명서

9

8

■

• Avoid placing the drive in a location subject to:

–high humidity
–high temperature
–excessive dust
–mechanical vibration
–direct sunlight.

We recommend to use the drive in a horizontal or vertical position.
Do not use it in a tilted position.

■

• Do not move the drive during operation. This may cause it to

malfunction during reading or writing.

• Avoid exposing the drive to sudden changes in temperature as

condensation may form on the lens inside the drive as a result.
Should the surrounding temperature suddenly rise while the drive
is on, wait at least one hour before you turn off the power.
Operating the drive immediately after a sudden increase in
temperature, may result in a malfunction during reading or
writing.

■

• Close the disc drawer before moving the drive.
• Keep the original packing materials for future transport of the

drive.

ANALOG AUDIO connector
Outputs analog audio signals.

Configuration Jumpers
See page 11 for details.

INTERFACE CONNECTOR (IDE bus)
Connect to ATA host adapter.

DC INPUT (power-in) connector
Connect to the power supply of the host computer.

Pin 1