Sony dav-lf1h 사용자 설명서
A
d
v
a
n
ced
Settin
g
s a
nd A
nd A
d
justm
e
nt
s
s
99
GB
Be sure to change the value in the Setup Display
when you move the speakers.
when you move the speakers.
* When you perform the Quick Setup (page 29), the
default settings are changed.
Note
• When you set the distance, the sound cuts off for a
moment.
• Depending on the input stream, the [DISTANCE
(FRONT)]/[DISTANCE (SURROUND)] setting
may not be effective.
may not be effective.
• When the speaker distance setting is not in the
recommended range,
/
** m is displayed (**
being the number).
indicates over the
recommended distance.
indicates below.
x
[LEVEL (FRONT)]
You can vary the level of front speakers as
follows. Be sure to set [TEST TONE] to [ON]
for easy adjustment.
follows. Be sure to set [TEST TONE] to [ON]
for easy adjustment.
x
[LEVEL (SURROUND)]
You can vary the level of surround speakers as
follows. Be sure to set [TEST TONE] to [ON]
for easy adjustment.
follows. Be sure to set [TEST TONE] to [ON]
for easy adjustment.
To adjust the volume of all the
speakers at one time
speakers at one time
Press VOLUME +/– on the remote or touch
VOLUME +/– (touch panel button) on the
control unit.
VOLUME +/– (touch panel button) on the
control unit.
x
[TEST TONE]
The speakers will emit a test tone to adjust
[LEVEL (FRONT)] and [LEVEL
(SURROUND)].
[LEVEL (FRONT)] and [LEVEL
(SURROUND)].
Adjusting the speaker level by
using the test tone
using the test tone
[L/R]
3.0 m
3.0 m
*
(appears when you set
[SURROUND] to
[YES] in the
[CONNECTION]
setting.)
[SURROUND] to
[YES] in the
[CONNECTION]
setting.)
Surround speaker distance
from the listening position can
be set in 0.2 meter increments
from 0.0 to 7.0 meters.
from the listening position can
be set in 0.2 meter increments
from 0.0 to 7.0 meters.
[L/R]
0.0 dB
0.0 dB
Set this between –15.0 dB and
+10.0 dB in 1.0 dB increments.
+10.0 dB in 1.0 dB increments.
[CENTER]
0.0 dB
0.0 dB
(appears when you set
[CENTER] to [YES] in
the [CONNECTION]
setting.)
[CENTER] to [YES] in
the [CONNECTION]
setting.)
Set this between –15.0 dB and
+10.0 dB in 1.0 dB increments.
+10.0 dB in 1.0 dB increments.
[SUBWOOFER]
0.0 dB
0.0 dB
Set this between –15.0 dB and
+10.0 dB in 1.0 dB increments.
+10.0 dB in 1.0 dB increments.
[L/R]
0.0 dB
0.0 dB
(appears when you set
[SURROUND] to
[YES] in the
[CONNECTION]
setting.)
[SURROUND] to
[YES] in the
[CONNECTION]
setting.)
Set this between –15.0 dB and
+10.0 dB in 1.0 dB increments.
+10.0 dB in 1.0 dB increments.
[OFF]
The test tone is not emitted from the
speakers.
speakers.
[ON]
The test tone is emitted from each speaker
in sequence while adjusting level. When
you select one of the [SPEAKER SETUP]
items, the test tone is emitted from each
speaker in sequence.
in sequence while adjusting level. When
you select one of the [SPEAKER SETUP]
items, the test tone is emitted from each
speaker in sequence.
C
/
X
/
x
/
c
,
DISPLAY
continued