Sony DCR-DVD505E 사용자 설명서

Automatically activates the electronic 
shutter to adjust the shutter speed when 
recording in bright conditions if you set it to 
[ON] (the default setting).

You can select and adjust the focal point to 
aim it at a subject not located in the center of 
the screen.

1

Touch the subject on the screen.

9

 appears.

2

Touch [END].

To adjust the focus automatically, touch 
[AUTO]

t[END] in step 1.

• If you set [SPOT FOCUS], [FOCUS] is 

automatically set to [MANUAL].

• The setting returns to [AUTO] when you set the 

POWER switch to OFF (CHG) for more than 12 
hours.

You can adjust the focus manually. Select this 
when you want to focus on a certain subject 
intentionally.

1

Touch [MANUAL].

9

 appears.

2

Touch 

 (focusing on close subjects)/

 (focusing on distant subjects) to 

sharpen the focus. 

 appears when the focus cannot be 

adjusted any closer, and 

 appears when 

the focus cannot be adjusted farther away.

3

Touch .

To adjust the focus automatically, touch 
[AUTO]

t

 in step 1.

• It is easier to focus on the subject by moving the 

power zoom lever towards T (telephoto) to adjust 
the focus, then towards W (wide angle) to adjust 
the zoom for recording. When you want to record 
a subject at close range, move the power zoom 
lever to W (wide angle), then adjust the focus.

• The minimum distance required between your 

camcorder and the subject to get a sharp focus is 
about 1 cm (about 1/2 inch) for wide angle and 
about 80 cm (about 2 5/8 feet) for telephoto.

• The setting returns to [AUTO] when you set the 

POWER switch to OFF (CHG) for more than 12 
hours.

You can set this function when you use the  
built-in flash or an external flash (optional) 
that is compatible with your camcorder.

x

Makes the flash level higher.

B

Makes the flash level lower.

x

You can prevent redeye by activating the flash 
before recording.
Set [REDEYE REDUC] to [ON], then press 

 (flash) (p.42) repeatedly to select a setting.

 (Auto redeye reduction): Pre-flashes to 

reduce redeye before the flash automatically 
flashes when there is insufficient ambient 
light.
r

 (Forced redeye reduction): Always 

uses the flash and the redeye reducing pre-
flash.
r

 (No flash): Records without flash.

• The redeye reduction may not produce the desired 

effect due to individual differences and other 
conditions.