Sony dvp-ns9100es 사용자 설명서

◆ BLACK LEVEL

Selects the black level (setup level) for the 
video (NTSC) signals output from the jacks 
other than COMPONENT VIDEO OUT/
HDMI OUT jacks.

◆

Selects the black level (setup level) for the 
video (NTSC) signals output from the 
COMPONENT VIDEO OUT jacks. You 
cannot select this when the player outputs 
progressive signals (page 77).

◆ COMPONENT OUT

Selects the type of signal output from the 
COMPONENT VIDEO OUT jacks. See page 
89 for more information about the two 
different signal types.

When the setting is changed, the confirmation 
display appears. If you do not select “Yes” or 
“No” within about 10 seconds, the setting is 
canceled and the display returns to the Setup 
Display.

Hold down 

x 

on the player and press PLAY 

on the player.

◆ 4:3 OUTPUT

This setting is effective only when you set 
“TV TYPE” in “SCREEN SETUP” to 
“16:9.” If you can change the aspect ratio on 
your progressive format (480p) compatible 
TV, change the setting on your TV, not the 
player. 
Note that this setting is effective only for 
HDMI connection, or progressive signals 
output from the COMPONENT VIDEO OUT 
jacks. 

◆ LINE

Selects video signals output from the LINE 
(RGB)-TV jack on the rear panel of the 
player.

• If your TV does not accept S video or the RGB 

signals, no picture will appear on the TV screen, 
even if you select “S VIDEO” or “RGB.” Refer to 
the instructions supplied with your TV.

• If your TV has only one SCART (EURO AV) 

jack, do not select “S VIDEO.”

• When you select “RGB,” you cannot use the 

COMPONENT VIDEO OUT jacks.

JACKET 
PICTURE

The jacket picture (still picture) 
appears, but only when the 
jacket picture is already 
recorded on the disc (DVD, 
etc.). If the disc does not 
contain a jacket picture, the 
“GRAPHICS” picture appears.

GRAPHICS A preset picture stored in the 

player appears.

BLUE

The background colour is blue.

BLACK

The background colour is black.

OFF

Lowers the standard black 
level. Use this when the picture 
becomes too white.

ON

Sets the black level of the 
output signal to the standard 
level.

OFF

Sets the black level of the 
output signal to the standard 
level. Normally select this 
position.

ON

Raises the standard black level. 
Use this setting when the 
picture appears too dark.

INTERLACE

Select this when the 
player is connected to a 
standard (interlace 
format) TV.

PROGRESSIVE Select this when you have 

a TV that can accept 
progressive signals.

FULL

Select this when you can change 
the aspect ratio on your TV.

NORMAL

Select this when you cannot 
change the aspect ratio on your 
TV. Shows a 16:9 aspect ratio 
signal with black bands on left 
and right sides of the image.

VIDEO

Outputs video signals.

S VIDEO

Outputs S video signals.

RGB

Outputs RGB signals.

16:9 aspect ratio TV

c continued