Sony dvp-ns9100es 사용자 설명서

◆ DOLBY DIGITAL (DVD VIDEO/DVD-RW 
only)

Selects the type of Dolby Digital signal.

◆ MPEG (DVD VIDEO/DVD-RW only)

Selects the type of MPEG audio signal.

◆ DTS (DVD VIDEO/DTS-CD)

Selects the type of DTS signal.

When “DTS” is set to “DTS” and a DTS-CD is 
played back, audio signals are not output from the 
AUDIO OUT L/R 1/2 jacks. When a component 
that cannot receive the stream signal of DTS is 
connected to the HDMI OUT jack, audio signals are 
not output from the HDMI OUT jack.

◆ 48 kHz/96 kHz PCM (DVD VIDEO only)

Selects the sampling frequency of the audio 
signal.

• The analog audio signals from the AUDIO OUT 

L/R 1/2 jacks and 5.1CH OUTPUT jacks are not 
affected by this setting.

• If the HDMI OUT jack is connected to equipment 

not compatible with 96 kHz/24 bit signals, 
48 kHz/16 bit PCM will be automatically output 
even when you select “96 kHz/24 bit.”

• Super Audio CD audio signals are not output from 

the DIGITAL OUT (COAXIAL or OPTICAL)/ 
HDMI OUT jack.

• If you connect a component that does not conform 

to the selected audio signal, a loud noise (or no 
sound) will come out from the speakers, 
damaging your ears or speakers.

• When audio signals are output from the HDMI 

OUT jack/i.LINK S200 (AUDIO) jack, the 
settings of “DIGITAL OUT” (except ON/OFF 
setting) are available.

◆ AUDIO (HDMI)

Selects the type of audio signal output from 
the HDMI OUT jack.

A loud noise (or no sound) will be output if you 
connect the player to a TV that is not compatible 
with DOLBY DIGITAL/DTS signals and “AUTO” 
is selected. In this case, select “PCM.”

D-PCM

Select this when the player is 
connected to an audio 
component lacking a built-in 
Dolby Digital decoder. You can 
select whether the signals 
conform to Dolby Surround 
(Pro Logic) or not by making 
adjustments to the 
“DOWNMIX” item in 
“AUDIO SETUP” (page 80).

DOLBY 
DIGITAL

Select this when the player is 
connected to an audio 
component with a built-in 
Dolby Digital decoder.

PCM

Select this when the player is 
connected to an audio 
component without a built-in 
MPEG decoder. If you play 
MPEG audio sound tracks, the 
player outputs stereo signals 
via the DIGITAL OUT 
(OPTICAL or COAXIAL) 
jack.

MPEG

Select this when the player is 
connected to an audio 
component with a built-in 
MPEG decoder.

D-PCM

Select this when the player is 
connected to an audio 
component without a built-in 
DTS decoder.

DTS

Select this when the player is 
connected to an audio 
component with a built-in DTS 
decoder.

48kHz/16bit The audio signals of DVD 

VIDEOs are always converted 
to 48 kHz/16 bit.

96kHz/24bit All types of signals including 

96 kHz/24 bit are output in their 
original format. However, if the 
signal is encrypted for 
copyright protection purposes, 
the signal is only output as 
48kHz/16bit.

AUTO

Normally, select this. Outputs 
audio signals according to the 
“DIGITAL OUT” settings 
(page 80).

PCM

Converts Dolby Digital, DTS, 
or 96 kHz/24 bit PCM signals to 
48 kHz/16 bit PCM.