Sony dvp-ns955v 사용자 설명서
88
• SUBWOOFER
Notes
• The cut off frequency for the subwoofer is fixed at
120 Hz.
• If your speakers are too small to reproduce low
bass frequencies, utilize a subwoofer for low
frequency sound. When you set the speaker
settings to “SMALL,” the bass redirection
circuitry will be activated and the bass
frequencies for the speakers are output from the
subwoofer.
frequency sound. When you set the speaker
settings to “SMALL,” the bass redirection
circuitry will be activated and the bass
frequencies for the speakers are output from the
subwoofer.
• Even if there are fewer than 6 speakers connected,
the player distributes the audio signal components
to the front speakers.
to the front speakers.
◆ DISTANCE
Sets the distance from your listening position
to the speakers.
Set the distance to your front speakers in
“FRONT” first (A). Then adjust the values in
“CENTER” (centre speaker B), and
“REAR” (rear speaker C) , and
“SUBWOOFER” (DVP-NS955V only) (D)
to reflect the actual distance to your centre
speaker, rear speakers, and subwoofer.
to the speakers.
Set the distance to your front speakers in
“FRONT” first (A). Then adjust the values in
“CENTER” (centre speaker B), and
“REAR” (rear speaker C) , and
“SUBWOOFER” (DVP-NS955V only) (D)
to reflect the actual distance to your centre
speaker, rear speakers, and subwoofer.
Be sure to change the value in the Setup
Display each time you move the speakers.
Start from the front speaker. The default
adjustments are in parentheses.
Display each time you move the speakers.
Start from the front speaker. The default
adjustments are in parentheses.
Note
If each of the front or rear speakers are not placed at
an equal distance from your listening position, set
the distance according to the closest speaker.
an equal distance from your listening position, set
the distance according to the closest speaker.
◆ LEVEL (FRONT)
Varies the level of the front speakers. Be sure
to set “TEST TONE” to “ON” for easy
adjustment.
The default adjustments are in parentheses.
to set “TEST TONE” to “ON” for easy
adjustment.
The default adjustments are in parentheses.
YES
Select this if you connect a
subwoofer to output the LFE
(Low Frequency Effect) signals
from the subwoofer.
subwoofer to output the LFE
(Low Frequency Effect) signals
from the subwoofer.
NONE
Select this if you do not connect
a subwoofer.
a subwoofer.
FRONT
(3 m)
(3 m)
Set this between 1 and 15 m
in 0.2 m increments.
in 0.2 m increments.
B
D
A
A
C
C
(1~15 m)
(1~15 m)
CENTER (3 m)
Set this within –1.6 and
+0.6 m of the “FRONT”
setting in 0.2 m increments.
For example, if “FRONT”
is set to 6 m, “CENTER”
can be set between 4.4 and
6.6 m.
+0.6 m of the “FRONT”
setting in 0.2 m increments.
For example, if “FRONT”
is set to 6 m, “CENTER”
can be set between 4.4 and
6.6 m.
REAR (3 m)
Set this within –5 and
+0.6 m of the “FRONT”
setting in 0.2 m increments.
For example, if “FRONT”
is set to 6 m, “REAR” can
be set between 1 and 6.6 m.
+0.6 m of the “FRONT”
setting in 0.2 m increments.
For example, if “FRONT”
is set to 6 m, “REAR” can
be set between 1 and 6.6 m.
SUBWOOFER
(3 m) (DVP-
NS955V only)
(3 m) (DVP-
NS955V only)
Set this within –1.6 and
+0.6 m of the “FRONT”
setting in 0.2 m increments.
For example, if “FRONT”
is set to 6 m,
“SUBWOOFER” can be
set between 4.4 and 6.6 m.
+0.6 m of the “FRONT”
setting in 0.2 m increments.
For example, if “FRONT”
is set to 6 m,
“SUBWOOFER” can be
set between 4.4 and 6.6 m.
L (0 dB)
Set this between –6 dB and
0 dB in 0.5 dB increments.
0 dB in 0.5 dB increments.
R (0 dB)
Set this between –6 dB and
0 dB in 0.5 dB increments.
0 dB in 0.5 dB increments.
CENTER
(0 dB)
(0 dB)
Set this between –12 dB
and 0 dB in 0.5 dB
increments.
and 0 dB in 0.5 dB
increments.
SUBWOOFER
(DVP-NS955V:
(DVP-NS955V:
DVD:
–
5 dB
Super Audio
CD: 0 dB
CD: 0 dB
DVP-LS785V:
–
5 dB)
Set this between –15 dB
and +5 dB in 0.5 dB
increments.
and +5 dB in 0.5 dB
increments.