Sony dvp-ns64p 사용자 설명서
20
9
Press X/x to select the type of jack
(if any) you are using to connect to
an audio component, then press
ENTER.
(if any) you are using to connect to
an audio component, then press
ENTER.
If you did not connect an audio
component, select “NO,” then go to step
13.
If you connected an audio component
using just an audio cord, select “YES:
LINE OUTPUT L/R (AUDIO),” then go
to step 13.
If you connected an audio component
using a digital coaxial cord, select “YES:
DIGITAL OUTPUT.”
component, select “NO,” then go to step
13.
If you connected an audio component
using just an audio cord, select “YES:
LINE OUTPUT L/R (AUDIO),” then go
to step 13.
If you connected an audio component
using a digital coaxial cord, select “YES:
DIGITAL OUTPUT.”
10
Press X/x to select the type of
Dolby Digital signal you wish to
send to your audio component.
send to your audio component.
If your audio component has a Dolby
Digital decoder, select “DOLBY
DIGITAL.” Otherwise, select “D-PCM.”
Digital decoder, select “DOLBY
DIGITAL.” Otherwise, select “D-PCM.”
11
Press ENTER.
“DTS” is selected.
12
Press X/x to select whether or
not you wish to send a DTS signal
to your audio component.
to your audio component.
If your audio component has a DTS
decoder, select “ON.” Otherwise, select
“OFF.”
decoder, select “ON.” Otherwise, select
“OFF.”
13
Press ENTER.
Quick Setup is finished. All connections
and setup operations are complete.
and setup operations are complete.
YES
NO
Is this player connected to an amplifier
(receiver) ? Select the type of jack you
are using.
(receiver) ? Select the type of jack you
are using.
LINE OUTPUT L/R (AUDIO)
DIGITAL OUTPUT
48kHz/96kHz PCM:
AUDIO SETUP
AUDIO DRC:
DIGITAL OUT:
DOLBY DIGITAL:
DTS:
DTS:
STANDARD
ON
DOWNMIX:
DOLBY SURROUND
D-PCM
DOLBY DIGITAL
D-PCM
AUDIO SETUP
AUDIO DRC:
DIGITAL OUT:
DOLBY DIGITAL:
STANDARD
ON
DOWNMIX:
DOLBY SURROUND
D-PCM
DTS:
48kHz/96kHz PCM:
48kHz/96kHz PCM:
OFF
OFF
ON