Sony dvp-ns64p 사용자 설명서

• While playing a Super VCD on which the audio 

track 2 is not recorded, no sound will come out 
when you select “2:STEREO,” “2:1/L,” or 
“2:2/R.”

• When playing in DVD-VR mode: If you connect 

to an audio component using the DIGITAL OUT 
(COAXIAL) jack and want to switch between the 
sound tracks, set “DOLBY DIGITAL” to “D-
PCM” in “AUDIO SETUP” (page 55).

You can check the audio signal format by 
pressing AUDIO repeatedly during playback. 
The format of the current audio signal (Dolby 
Digital, DTS, PCM, etc.) appears as shown 
below.
◆When playing a DVD VIDEO

Dolby Digital 5.1 ch

◆When playing a DivX video file on a DATA 
CD or DATA DVD

MP3 audio

Audio signals recorded in a disc contain the 
sound elements (channels) shown below. 
Each channel is output from a separate 
speaker.
• Front (L)
• Front (R)
• Center
• Rear (L)
• Rear (R)
• Rear (Monaural): This signal can be either 

the Dolby Surround Sound processed 
signals or the Dolby Digital sound’s 
monaural rear audio signals.

• LFE (Low Frequency Effect) signal

If “DTS” is set to “OFF” in “AUDIO SETUP” 
(page 56) the DTS track selection option will not 
appear on the screen even if the disc contains DTS 
tracks.

1:ENGLISH DOLBY DIGITAL

3 / 2 .1

Rear (L/R)

Front (L/R) 
+ Center

LFE (Low Frequency 
Effect)

1: 

MP3     128k

Bit rate