Sony dvp-ns64p 사용자 설명서

◆ BLACK LEVEL (COMPONENT OUT)
Selects the black level (setup level) for the 
video signals output from the COMPONENT 
VIDEO OUT jacks. You cannot select this 
when the player outputs progressive signals 
(page 14).

◆ PROGRESSIVE (COMPONENT OUT 
ONLY)

If your TV accepts progressive (480p) format 
signals, set “PROGRESSIVE 
(COMPONENT OUT ONLY)” to “ON”. 
Note that you must connect to a progressive 
format TV using the COMPONENT VIDEO 
OUT jacks (page 14).

Select “PROGRESSIVE 
(COMPONENT OUT ONLY),” and 
press ENTER.

Select “ON,” and press ENTER.
The display asks for confirmation.

Select “Start” and press ENTER.
The video switches to a progressive 
signals for 5 seconds.

If the picture appears normal, select 
“YES,” and press ENTER. 
If not, select “NO,” and press ENTER.

If the picture does not appear normal or goes 
blank, press 

[

/1

 to turn off the player, and 

enter “369” using the number buttons on the 
remote, then press 

[

/1

 to turn on the player 

again.

◆ MODE (PROGRESSIVE)

In order for these images to appear natural on 
your screen when output in progressive 
mode, the progressive video signal needs to 
be converted to match the type of DVD 
software that you are watching.
This setting is effective only when you set 
“PROGRESSIVE (COMPONENT OUT 
ONLY)” in “SCREEN SETUP” to “ON.”

◆ 4:3 OUTPUT

This setting is effective only when you set 
“TV TYPE” in “SCREEN SETUP” to 
“16:9.”
Adjust this to watch 4:3 aspect ratio 
progressive signals. If you can change the 
aspect ratio on your progressive format 
(480p) compatible TV, change the setting on 
your TV, not the player. This setting is 
effective only when you set 
“PROGRESSIVE (COMPONENT OUT 
ONLY)” in “SCREEN SETUP” to “ON.”

OFF

Sets the black level of the 
output signal to the standard 
level. Normally select this 
position.

ON

Raises the standard black level. 
Use this setting when the 
picture appears too dark.

OFF

To output normal (interlace) 
signals.

ON

To output progressive signals.

AUTO

Automatically detects the 
software type (film-based or 
video-based) and selects the 
appropriate conversion mode. 
Normally, select this position.

VIDEO

Fixes the conversion mode to 
the mode for video-based 
software.

FULL

Select this when you can 
change the aspect ratio on your 
TV.

NORMAL

Select this when you cannot 
change the aspect ratio on your 
TV. Shows a 16:9 aspect ratio 
signal with black bands on left 
and right sides of the image.

16:9 aspect ratio TV